V-1 The Fast Setting Screed

V-1 is a ready-to-use screed mortar for 30-50mm thickness, and suitable for bonded as well as unbonded applications. V1-1 is the cement only version, aggregate to be mixed in the jobsites.

Both products have the abilities to create a fast curing screed, and allow to grind & polish after 24hours from installations. 


Download V-1 Catalogue

* Save Time

* High Earlth Strength 

* Good Working Ability 

* Polishable & Reliable

Bonddex V System is a low shrinkage anti-cracking cementitious based product, which involves many capabilities in many types of flooring application jobs.

SUBSTRATES 

REQUIRED SUBSTRATES 

1. Approved solid building structure.


2. Without any delamination, and laitance issues.


3. Super flat and cleaned substrate.


UBSTRATE PREPARATION


1. Scarifying, shotblasting or metal 10# grinding for creating better profile and increasing bonding ability.


2. Repair existing cracks and grout lower areas with R systems, demolish weak & higher 

areas to make sure overall flatness before installing the V systems.


3. Install 5cm x 5 cm of Steel-Reinforcement to any 90 degree objects such as columns, 

edges, floor boxes or circular column.


4. Form Joints at all the columns.


5. Saturated Surface Dry to the substrates before installing.


6. For unbonded application, minimum 40mm installation thickness is strongly required. 


MIXING

Water Ratio

數據資料_V-1(EN)-02.png


INSTALLATION

* Pour mixed batches accordingly and follow by straight line.

* Recommend to pour slightly over the previously poured, and ensure the thickness is constantly the same, and no more than 1 min delay in between the pours. (V-1: 30mm – 50mm) 

* Use gauge rake, smoothing paddle or troweling to create the thickness or flatness, and use spike-roller in some conditions. 

* Do wetting procedure after 4 – 6 hours from final set for 2 hours. 


VIDEO


1. Minimum requirement to be used with 2 industrial hand-held mixers with minimum 500RPM and 1200W.

2. Pan Mixer is also recommended.
Mix with clean water for 3 minutes to 5 minutes.
25 Minutes of working time. 

3. Prohibited to install under windy condition.


4. Prepare joint saw cuts/strips follow by columns or on top of the original joints. 


6 months in unopened containers.