‧ The completion floor surface which the material level control easily. An advantage to add any other material in the upper lay of base floor material, the visual effect is good also.

‧ This product material may apply to upper of any kind of base material. For example the RC surface, plaster finish smoothing surface, the ceramic tile surface, the terrazzo, the stone material surface, the lumber surface, the steel metal material surface and the like sanding rough substance damages surface, may adhere firmly solid in the surface layer.

‧ The product finish surface to provide homogeneous bright color and even exposed under the sun which it is not to get older and the discoloration by the ultraviolet ray r the discoloration.

‧ The maintenance cost is inexpensive, and also the construction method easy and convenience.

【 Preparation Work 】

‧ The old original surface which needs to apply the Self-Leveling Compound area clears bounding interface surface, removes the loose material, and eliminates the dust, the grease and all of other could damage surface bounding substance. When necessity cleans by chemistry lotion or by the mechanical grinder.

‧ The new pouring concrete surface should overall leveling and smoothing, hard, the surface dust and all of other could damage surface bounding substance should cleanly.

‧ If original ground surface uneven or pothole condition should repair by high    strength material to have good treatment (the old and new interface area should priority), after treats and allover area dry hardening, then apply the Self-Leveling Compound mortar on the top .

‧ Before to apply the Self-Leveling Compound Mortar, allover application area needs to apply the water type resin (resin mixing with water) for a bonding agent as a primer coat, the water type resin bonding agent which to use the resin do not less than 0.2kg/m2 (if the apply area ground more rougher which the resin amount used to have to increase).

‧ After waits the primer coat completely dry hardening then to be performing the Self-Leveling Compound Mortar product on the top of primer coat as per estimate usually must treat execute every other day does.

‧ According to allocated proportion to put the Self-Leveling Compound powder product in the clearing barrel, joins with water then star to mix by the handhold mixer, after mixes 3 minutes evenly, becomes pulpous flows then to fall in the construction surface, since, the product mortar has the fine fluidity and the expansible characteristic and work by special steel finish surface trowel, the finish thickness average could 3~5mm, also may execute dose 10mm.

【 Mixing 】

‧  The Self-Leveling Compound mixing mortar to apply to use which the period do not more than 5 minutes, also the mixing time may not excessively, when the necessity may use the de-foam admixture.

‧  If the Self-Leveling Compound wants to mix with other chemical admixture, to make a trial mix before apply to use firstly, or to contact with the Bonddex company service engineer.

‧ The Self-Leveling Compound is the self-curing type product, since self-curing so, does not need to perform the Self-Leveling Compound constructs under outdoor with sunlight and wind to avoid too being strong wind and great sunlight.

‧  The Self-Leveling Compound regular packing weight is 25kg, each package which according with weather condition to add 0.22~0.24 and to recommend to adjust by site condition. The product material stores do not under sunlight and as far as possible to keep material under fine air ventilation, and also to keep material under dry air condition. The date of expiry of product should half year.

 ‧ Before to perform the Self-Leveling Compound at the site to recommend to make a simple mock up to assure serviceability of the said material.

‧ Size: 25kg/ pack. 

‧ Shelf Life & Storage: The date of expiry of product should half year. Please keep material under dry air condition.