C.P.P. is primarily composed of single-component water-based acrylic resin, blended with high-hardness silica aggregates, working aids, and other wear-resistant materials. It is sprayed directly onto the construction shighly stain-resistant, abraurface, forming a film that creates a sion-resistant colored surface layer. This coating prevents sanding, facilitates easy cleaning, resists oil stains, and enhances the visual appeal of parking areas.
Parking Lot
【Preparation】
‧ Ensure that the base surface is a fully polished concrete grouting floor with good surface hardness. If there are minor holes on the surface, acrylic resin mortar can be used for partial repairs. If the quality of the base concrete is poor, it is recommended to reapply a 5cm layer of concrete and re-polish it to achieve a good base as much as possible.
‧ Clean the base thoroughly using plain water. Remove any surface water after cleaning.
‧ Apply a full coat of C.P.P. primer. Dilute the acrylic resin primer with water at a ratio of 1:2. Apply it evenly using a roller or sprayer, with an approximate usage of 0.2kg/m2.
‧ Allow the primer to dry completely before proceeding. After opening the C.P.P. main material, mix it thoroughly with a handheld electric mixer until it is suspended. Apply it in two coats using a sprayer or roller, ensuring a minimum usage of 0.2 to 0.3 kg/m2. Allow it to air dry after application, and the area can be opened to traffic after 3 days.
This product is suitable for use in underground parking lots that are highly humid, but usage should be postponed if the relative humidity exceeds 80%.
‧ Packaging: 25kg/PE drum.
‧ Storage: Store in a cool, ventilated place. Shelf life is 6 months.